Hans Grohe Axor 17010XX1 User Manual download pdf (Page 2)

Technical Specification

Hole size in mounting surface

Minimum 1-3/8” Maximum 1-5/8”

Maximum mounting surface depth 1-1/4”

Flow rate 2.2 GPM

Maximum operating pressure 145 PSI

Recommended operating pressure 22 - 72.5 PSI

Recommended hot water temp 120

- 140

M3 cartridge with Boltic

handle screw

*Some governing bodies require that the water heater be set to 120

F or

less. Please know and follow all local codes when setting the temperature

on the water heater.

Installation Considerations

• For best results, Hansgrohe recommends installation by a licensed professional plumber.

• Large differences in pressure between the hot and cold supplies should be balanced.

• The supply hoses on this faucet require supply stops with 3/8” compression fittings (not included).

• This faucet has a high temperature limit stop. It ships from the factory on the maximum setting, but may

be reset to a lower temperature if desired.

Axor Carlton Single Control Lavatory Faucet

17010XX1

1 2 3 4 5 6 7 8

No comments

Hans Grohe Axor 17010XX1 User Manual Page 2